How to Make a Phone Cord with Beads - Step by Step
Phone cords with beads are everywhere. On Instagram, TikTok and in the streets. But did you know you can make one yourself in about 20 minutes? In this step-by-step guide you'll learn exactly how to make a phone cord with large acrylic beads and a gold chain. No experience needed.
What Do You Need to Make a Phone Cord?
Before you start, make sure you have all the materials ready. For a phone cord with acrylic beads you need the following:
- Large acrylic beads - preferably 15 pieces of approximately 21mm x 12mm
- Gold curb chain - for connecting the cord to your phone
- 2 lobster clasps - to attach the cord to the phone card holder
- 2 open jump rings - for connecting the clasps to the chain
- Phone card holder - fits in almost every phone case
- Flat nose pliers - for opening and closing the jump rings and clasps
Don't have a set of pliers yet? You'll need them not just for this project but for virtually all jewelry you make.
Step-by-Step: How to Make Your Own Phone Cord
Step 1 - Prepare your workspace
Lay all the materials in front of you on a clean, flat surface. Place your beads in a small dish so they don't roll away. Make sure your flat nose pliers are within reach.
Step 2 - Attach the first lobster clasp
Take an open jump ring and open it sideways with the flat nose pliers. Slide the jump ring through the opening of the first lobster clasp and through the first link of the chain. Close the jump ring firmly.
Step 3 - String the beads
Thread all 15 acrylic beads onto the chain one by one. Slide each bead all the way to the attached end so they sit tightly against each other. The beads slide over the chain, this is intentional.
Step 4 - Attach the second lobster clasp
Take a second open jump ring and open it sideways. Slide the jump ring through the opening of the second lobster clasp and through the last link of the chain, after the last bead. Close the jump ring firmly.
Step 5 - Close the chain
Hook both lobster clasps onto the D-ring of the phone card holder. Check that both clasps are secure by gently pulling on them.
Step 6 - Attach the phone card holder to your phone
Slide the phone card under your phone case. The gold plate remains visible on the outside. The D-ring hangs at the bottom, to which you've attached the cord.
Done! Your phone cord is finished.
Tips for a Better End Result
Check the direction of your beads. Large acrylic beads sometimes have a clear front and back. Make sure all beads face the same direction for a neater result.
Pull the chain tight. Make sure the beads sit tightly against each other and no chain is visible between the beads. Slide the beads firmly toward the attached end before attaching the second clasp.
Check all jump rings. Make sure all open jump rings are completely closed. A jump ring that isn't properly closed can come loose, causing your phone cord to detach from your phone.
Choose a color that suits you. Phone cords come in many colors. Pink for a romantic look, green for a bold style or purple for something festive. Choose the color that suits you best.
Which Phone Cases Are Compatible?
The phone card holder fits in almost every phone case with a card slot on the back. This includes most standard silicone and plastic cases. Simply slide the card under the case, between the case and the back of your phone.
Don't have a case with a card slot? You can also attach the card holder with a special adhesive sticker, but this is less secure.
How Long Does It Take to Make a Phone Cord?
A phone cord with acrylic beads is ready in about 20 minutes. It is one of the easiest jewelry projects you can make and perfect if you want to make something with your hands for the first time. You don't need to learn any special techniques and the instructions are easy to follow.
Ready to Get Started?
Our DIY phone cord kit contains all the materials you need to start right away. Acrylic beads, gold chain, lobster clasps, open jump rings and a phone card holder. Everything in one kit, including an instruction card with QR code for the video guide.
Frequently Asked Questions About Making Phone Cords
Do I need special skills?
No, this is one of the easiest jewelry projects for beginners. You only need flat nose pliers and the rest is done by hand.
Can I use other types of beads?
Yes, you can use any type of bead as long as the opening is large enough to thread the chain through. Large acrylic beads are the easiest to work with.
How strong is the phone cord?
The chain and clasps are made of stainless steel and are very strong. As long as you close the jump rings properly the cord is durable and long-lasting.
Does the phone card holder fit my case?
The card holder fits in almost every standard phone case with a card slot or space on the back. If in doubt, try the card first before attaching the cord.
Can I also wear the phone cord as a bracelet?
Yes, many people wear their phone cord around their wrist when holding their phone. The cord is long enough to fit comfortably around your wrist.
Conclusion
Making a phone cord with acrylic beads is easier than you think. With the right materials and this step-by-step guide you'll be done in 20 minutes. The result is a unique accessory that perfectly matches your style, because you made it yourself.
Ready to get started with a complete kit?
